FESTO
FESTO Compact cylinder ADN-16-10-A-P-A-S20 536218
$1.00
+ Free Shipping- Stroke1 mm … 300 mm
- Piston diameter16 mm
- Based on standardISO 21287
- CushioningElastic cushioning rings/plates at both ends
- Mounting positionAny
- Mode of operationDouble-acting
- DesignPiston Piston rod Profile barrel
- Position detectionVia proximity switch
- VariantsAdvancing stroke adjustment Weld spatter protection Piston rod with female thread Piston rod with external hexagon Module for reaching a specific end position in case of a pressure failure Transverse force increased Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Temperature range 0 to 150°C Additional PTFE piston guide
- Operating pressure0.1 MPa … 1 MPa
- Operating pressure1 bar … 10 bar
- Operating pressure14.5 psi … 145 psi
- CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
- UKCA marking (see declaration of conformity)To UK EX instructions
- Explosion protection certification outside the EUEPL Db (GB) EPL Gb (GB)
- Explosion protectionZone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX)
- ATEX category gasII 2G
- ATEX category dustII 2D
- Explosion ignition protection type for gasEx h IIC T4 Gb
- Explosion ignition protection type for dustEx h IIIC T120°C Db
- Explosion ambient temperature-20°C <= Ta <= +60°C
- Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
- Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
- Corrosion resistance class CRC0 – No corrosion stress 2 – Moderate corrosion stress 3 – high corrosion stress
- LABS (PWIS) conformityVDMA24364-B1/B2-L VDMA24364 zone III
- Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
- Ambient temperature-20 °C … 120 °C
- Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke90 N
- Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke90 N … 121 N
- Additional weight per piston rod extension of 10 mm4 g
- Additional weight per piston rod thread extension of 10 mm2 g
- Type of mountingWith through-hole With female thread With accessories
- Pneumatic connectionM5
- Note on materialsRoHS compliant
- Material collar screwsSteel
- Material coverAnodised wrought aluminium alloy
- Material piston rodHigh-alloy steel
- Material cylinder barrelSmooth-anodised wrought aluminium alloy
