New Original Keyence Sz-16V Safety Laser ScannerAutomation Industry

1, the minimum detectable object size in the warning area requires a reflectivity of 20% or higher.https://heiautomation.com/product/
*2 If there is a highly reflective background within 1.5 m of the boundary of the protected area, an additional necessary distance of 200 mm must be added to the protected area when calculating the minimum safe distance.https://heiautomation.com/contact-us/
*3 When using power conversion equipment, the total load current of OSSD output and AUX output must be 1.5 A or less; When using a battery, it must be 1.0A (0.5A when the cable length is 5 m) or less.
*4 This also takes into account the case where the power is turned off or off.
*5 The wiring resistance (except cable resistance) between the OSSD output and the connected device must be 2.5Ω or less to ensure proper operation. However, if the load current is 300 mA or greater, the resistance must be 1.0 Ω or more
Down.
*6 If battery powered, this value must be 10 m or less.
*7 If the cover plate is set to open, or the connector cable is not connected, the IP65 certification cannot be met.
*8 The installation result of the SZ should not cause external flare-up within ±5° of the test plane.