FESTO
FESTO Proximity sensor SIES-8M-PO-24V-K-0/3-M8D 551392
$35.00
+ Free Shipping- DesignFor T-slot
- Conforms to standardEN 60947-5-2
- Symbol00991614
- ApprovalRCM trademark c UL us listed (OL)
- CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
- UKCA marking (see declaration of conformity)according to UK instructions for EMC (UK-E) according to UK RoHS instructions (UK-R)
- KC markKC-EMV
- Note on materialsRoHS-compliant
- Measured variablePosition
- Measuring principleInductive
- Rated operating distance1.5 mm
- Reduction factorsAluminium = 0.62 Stainless steel V2A = 0.95 Copper = 0.6 Brass = 0.72 Steel St 37 = 1.0
- Ambient temperature-25 °C … 70 °C
- Repetition accuracy with constant conditions<= 0.05 mm, approach from the side
- Switching outputPNP
- Switching element functionN/C contact
- Switch-on time≤1.0E-4 ms
- Max. switching frequency4500 Hz
- Max. output current150 mA
- Max. switching capacity DC4.5 W
- Voltage drop≤2 V
- Inductive protective circuitIntegrated
- Min. load current0 mA
- Off-state current≤0.01 mA
- Short circuit current ratingPulsed
- Overload protectionAvailable
- Operational voltage range DC10 V … 30 V
- Residual ripple10 %
- No-load supply current≤10 mA
- Reverse polarity protectionFor all electrical connections
- Electrical connection 1, connection typeCable with plug
- Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
- Electrical connection 1, number of connections/cores3
- Electrical connection 1, type of mountingScrew-type lock Rotatable
- Electrical connection 1, compatible type of mountingCompatible with rotatable/non-rotatable screw-type lock
- Electrical connection 1, connection pattern00991155
- Connection outlet orientationIn-line
- Material electrical contactGold-plated brass
- Test conditions cableBending strength: to Festo standard Test conditions on request Energy chain: > 5 million cycles, bending radius 75 mm
- Cable length0.3 m
- Cable characteristicStandard/suitable for energy chains
- Cable sheath colourGrey
- Material cable sheathTPE-U(PU)
- Material insulating sheathPP
- SizeSlot 8
- Type of mountingFlush with T-slot Screw-clamped Insertable in the slot from above
- Tightening torque0.6 Nm
- Mounting positionoptional
- Mounting typeFlush
- Housing colourBlack
- Material housingPUR High-alloy stainless steel
- Switching status indicationYellow LED
- Ambient temperature with moving cable-5 °C … 70 °C
- Degree of protectionIP65 IP67
- Insulation voltage50 V
- Immunity to surge0.8 kV
- Corrosion resistance class CRC2 – Moderate corrosion stress
- LABS (PWIS) conformityVDMA24364-B2-L
- Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
- Pollution degree3
- Additional information for sensor selectionFor T-slot
- Electrical outputPNP
- Selection of sensor designSpecial design
