IFM Diffuse Reflective Ultrasonic Sensor UGT592

Product Features
Electrical Design PNP
Output function: Normally open / Normally closed; (Parameters can be set)
Inductive distance [mm] 40…300; (Target object: 100 x 100 mm)
Communication interface IO-Link
Shell with M18 threads, square design
Dimensions [mm]: 53 x 20 x 37.7
Electrical data
Working voltage [V] 10… 30 DC; (Compliant with the cULus – Class 2 standard)
Current loss [mA] < 35
Protection level III
Reverse protection is available.
Boot-up delay time [s] < 0.3
Conversion frequency [kHz] 30
Total input/output
Total input and output numbers: Number of digital outputs: 1
Output

Output quantity: 1
Electrical Design PNP
Number of digital outputs: 1
Output function: Normally open / Normally closed; (Parameters can be set)
Switching output DC voltage drop maximum value [V] 2.2
Continuous current load [mA] for the digital output DC: 10
Switching frequency DC [Hz] 8
Short-circuit protection is available.
Overload protection is available.
Monitoring scope
Inductive distance [mm] 40…300; (Target object: 100 x 100 mm)
Blind zone [mm] 40
Cylindrical aperture angle [°] 15; (±2)
Maximum deviation of 90° angle sensor/target [°] ± 4
Accuracy/Bias
Temperature compensation is available.
Delay [%] < 1
Switch point offset [%] -2… 2

The linear error of the analog output [%] is ≤ 1
Repeatability accuracy for IO-Link [%] < 0.7
Repeatability accuracy: 1%
Resolution [mm] 1
Note: The preheating time reaches the indicated value after 20 minutes.