FESTO
FESTO ISO cylinder DSBC-80-100-C-PPVA 1463495
$1.00
+ Free Shipping- Stroke1 mm … 2800 mm
- Piston diameter80 mm
- Piston rod threadM12
- Torsional backlash at piston rod +/--0.45 deg … 0.45 deg
- Based on standardISO 15552
- CushioningElastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
- Mounting positionoptional
- Conforms to standardISO 15552
- Piston-rod endMale thread Female thread
- DesignPiston Piston rod Profile barrel
- Position detectionVia proximity switch
- Symbol00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971
- VariantsAdvancing stroke adjustment Weld spatter protection Extended male piston rod thread Piston rod with external hexagon Low friction for balancer applications Metal scraper Module for reaching a specific end position in case of a pressure failure Reinforced piston rod Uniform, slow movement Low friction Through, hollow piston rod Sensor slots on 3 profile sides Additional PTFE piston guide
- Mode of operation clamping unitRetracting Advancing Static Released through compressed air Frictional clamping with spring force
- Static holding force of clamping unit5000 N
- Axial backlash of clamping unit0.8 mm
- Clamping unit release pressure0.3 MPa
- Clamping unit release pressure3 bar
- Mode of operation end-position lockingPositive interlocking with stop cylinder Released through compressed air
- Static holding force of end-position locking5000 N
- Axial backlash end-position locking1.5 mm
- Unlocking pressure≥0.15 MPa
- Unlocking pressure≥1.5 bar
- Locking pressure≤0.05 MPa
- Locking pressure≤0.5 bar
- Operating pressure0.005 MPa … 1.2 MPa
- Operating pressure0.05 bar … 12 bar
- Mode of operationDouble-acting
- CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
- UKCA marking (see declaration of conformity)To UK EX instructions
- Explosion protectionZone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX)
- ATEX category gasII 2G
- ATEX category dustII 2D
- Explosion ignition protection type for gasEx h IIC T4 Gb
- Explosion ignition protection type for dustEx h IIIC T120°C Db
- Explosion ambient temperature-20°C <= Ta <= +60°C
- Explosion protection certification outside the EUEPL Db (GB) EPL Gb (GB)
- Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
- Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
- Corrosion resistance class CRC2 – Moderate corrosion stress 3 – high corrosion stress
- LABS (PWIS) conformityVDMA24364-B1/B2-L VDMA24364 zone III
- Ambient temperature-40 °C … 150 °C
- Impact energy in end positions0.9 J … 1.8 J
- Cushioning length0 mm … 31 mm
- Max. torque for protection against torsion3 Nm
- Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke2721 N
- Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke2721 N … 3016 N
- Additional weight per piston rod extension of 10 mm39 g
- Additional weight per piston rod thread extension of 10 mm22 g
- Type of mountingVia female thread With accessories
- Pneumatic connectionG3/8
- Note on materialsRoHS-compliant
- Material coverCoated die-cast aluminium
- Material springSpring steel High-alloy stainless steel
- Clamping unit housing materialAnodised wrought aluminium alloy
- Material housing end-position lockingAnodised wrought aluminium alloy
- Material piston sealFPM HNBR TPE-U(PU)
- Material clamping jaws clamping unitBrass
- Piston clamping unit materialPOM
- Material piston end-position lockingHardened steel
- Material pistonWrought aluminium alloy
- Material piston rodHigh-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel
- Material piston rod wiperFPM HNBR PE TPE-U(PU)
- Buffer seal materialFPM TPE-U(PU)
- Material of cushioning bossAluminium POM
- Material cylinder barrelSmooth-anodised wrought aluminium alloy
- Material nutGalvanised steel
- Material rod wiperBrass PTFE reinforced TPE-E
